Inscrit le: 23 Avr 2018
|Posté le: Lun 21 Mai - 10:27 (2018) Sujet du message: Server 2012 R2 en TX1310 M1 RAID 1
Can not be installed on a Fujitsu TX1310 M1 the Microsoft Server 2012 R2 Foundation operating system in RAID mode 1. Has a raid controller LSI embedded software. With ServerView Installation Manager, at the end of Setup Wizard installation gives an error "Internal Server Error" and does not start the installation.
If I install from the operating system CD, although I have 2 SATA drives in operational RAID 1, the wizard detects 2 hard drives instead of 1, the logical volume. If I provide the "LSI Logic Embedded MegaRAID for Windows Server 2012 R2", changed driver and detects only 1 volume. Unless I can install the SO. Finish the installation of Server 2012 R2 perfectly, but in the device manager as storage controller have a 'SATA RAID Controller Intel C600 Series Chipset". Disk Manager sees me 2 disks rather than 1 volume, and RAID Server Manager does not detect controller or logical volume or hard drives.
If Device Manager I provide the "LSI Logic Embedded MegaRAID for Windows Server 2012 R2" driver for the storage controller, replace with a "LSI Logic Embebbed ...." but not restart the machine.
Is it possible to install on this machine with this controller Server 2012 R2 one on a RAID1?
Any help will be apprecited.
I didn't find the right solution from the Internet.